INOVA Products )----[ INOVA MicroLight XT LED Wand ]
Images of the INOVA MicroLight XT LED Wand info & examples
Images of the INOVA MicroLight XT LED Wand color selections
We thought we had seen it all. Until we saw this! The brilliant folks at Nite Ize teamed
up with the equally bright minds from INOVA, and the result is this remarkable piece of
technological wizardry. The multi-purpose, multi-environment portable lighting device,
imagined for the future in science fiction movies, is available today for less than fifteen
bucks! It serves as a tent light, a dive marker light, an emergency signal beacon, and
so much more. The potential applications seem endless. The wand is brighter than a
standard chemical lightstick, but it will provide light for about twice as long. And when
it finally goes out, you can easily and quickly replace the batteries and start it up again.
You can even store an extra set of batteries in the head! The long term operating cost
and discarded waste materials are lower than with single-use chemical lightsticks, but
the wand is far more versatile, and it delivers more useful lighting with longer run times.
When you need a nightlight for your tent or motel room, just set it to the low brightness
mode. When you need a signal beacon for roadside emergencies, set it to the flasher
mode. An adjustable lanyard is included, so you can carry it anywhere, and then hang
it up for 360° area lighting when you get there. The durable wand body is rated water-
proof to 500 feet (150 meters), and can be used for all sorts of water sports activities.
The polished end of the wand throws a concentrated spot beam for tasks like reading
or searching the glove box or changing a fuse. At the heart of each wand is a special
version of the INOVA MicroLight flashlight, without the timed automatic shut-off feature
(so it won't go off when you need it to stay on). Great for the car, boat, home, or office.
For color temperature or wavelength details, visit our LED Color Specifications page.
Click the following link to view or download operating instructions for the LED Wand:
WandInstructions.PDF. Open the file with Adobe Acrobat (or the free Adobe Reader
program, which can be downloaded at no charge from the Adobe Systems web site).
Note that for certain highly specialized applications, the UltraViolet or InfraRed model
of the standard INOVA MicroLight can be installed into the wand (but these types are
not available packaged with the wand). Always be sure to wear UV-protective yellow
filter glasses for safety when working with or around UltraViolet sources of any kind.
|THE WAND -
|A rugged polycarbonate head is bonded to a durable acrylic light beam wand.
|The light wand has an etched outer surface for smooth and even 360° lighting,
and a flat polished end that projects a tight circular spot beam for task lighting.
|The head has a single-twist removable cap. Individual compartments within
the head provide storage for the MicroLight, spring clip, and spare batteries.
|To switch on, change modes, or switch off the light, you will need to unscrew
the cap, and then replace it when done (this takes around ten seconds total).
|An o-ring between the head and the cap ensures a reliable water-tight seal.
|The wand with its MicroLight installed will float in fresh or salt water. If spare
batteries are carried, the complete package exhibits near-neutral buoyancy.
|Includes a sturdy nylon lanyard with an adjustable stop for secure mounting.
|Overall size is about
7-7/8" long, with maximum head diameter about 1-3/8".
|The combined weight of the wand with its MicroLight is less than four ounces.
|THE FLASHLIGHT -
|A powerful white or color LED is recessed in the body for protection from abuse.
|The durable polycarbonate body is both impact-resistant and weather-resistant.
|Translucent body glows with LED color when lighted, and has matching accents.
|Rust-proof stainless steel spring clip provides easy attachment almost anywhere.
The clip can be easily removed, allowing for a variety of alternative applications.
|Overall size is just 15/16" wide x 1-7/8" long x 5/16" thick, not including the clip.
The unique clip is about 1-1/2" long. The flashlight weight is less than 1/2 ounce.
|Has soft-touch push-button switch on front for electronic control of the four modes:
continuous high beam, continuous low beam, signal flasher, and momentary use.
|Bright beam projects for up to fifty feet, and signal is visible for up to 1-1/2 miles.
|To change from signal mode to high/low/flash multi-mode, press on and hold until
light goes out (15 to 20 seconds). See complete instructions on package insert.
|Typical bulb life is tens of thousands of hours, battery life up to 20 hours or more.
|Available with four LED colors: White for general purposes, Red for hunters and
astronomers, Green for pilots and military, or Blue for police and forensics uses.
The bright Red color is also perfect for flashing emergency beacon purposes.
|Powered by two lithium coin cell batteries (included), that are easily and quickly
replaced (just use an ordinary house key to pop open the back of the flashlight).
|Operates in searing summer heat and sub-zero winter cold, with a long shelf life.
|THE PACKAGE -
|The MicroLight, wand and lanyard are packed in a handsome captive blister card.
|Package includes two batteries installed in the light, spares are available below.
|Our price is well below the $17.95 suggested retail, and an
|Three-year no-worries factory replacement warranty from INOVA / Nite Ize.
|INOVA MicroLight XT LED Wand Flashlights
|INOVA MicroLight XT LED Wand - White LED
|INOVA MicroLight XT LED Wand - Blue LED
|INOVA MicroLight XT LED Wand - Green LED
|INOVA MicroLight XT LED Wand - Red LED
|INOVA MicroLight XT LED Wand Accessories
|Maxell CR2016 Lithium Replacement Batteries (2)
The same batteries are used for all color versions.
|Maxell CR2016 Lithium Replacement Batteries (12)
Additional discounts available for larger quantities.
Click an Add To Cart or Back Order button to place an item in the shopping cart, for purchase with
your credit card or debit card. Add To Cart items are usually in stock, and typically arrive within
one week. Back Order items are not always in stock, but usually arrive in two to three weeks.
Click a View Cart button to review the shopping cart contents and/or complete your order.
Click any underscored Item No to review the associated product detail page or image.
See the Order Info page for complete details on ordering, payment, and shipping.
INOVA Products )----[ INOVA MicroLight XT LED Wand ]